System 2500 Standard Features: 1). For use with a separate clutch and brake or a combined clutch/brake (electric or pneumatic). 2). KEYED MODE SELECTOR SWITCH FOR: Manual Set-up, Inch/Single, Off, Run. 3). Five FRONT PANEL FUNCTION INDICATOR LIGHTS. 4). ONE OR TWO RUN BUTTONS with remote jog capability. 5). RESET, EMERGENCY STOP, and ARMING/CYCLE STOP buttons. 6). Four FEED MALFUNCTION JACK INPUTS. 7). 13 LED STATUS AND FAULT INDICATOR PANEL on the Main Control Board.

8). AUTOMATIC MOTOR LOCKOUT in MANUAL SETUP mode for use with combined clutch/brakes.

9). AUXILIARY INPUTS FOR: Guard (bypassed in setup modes), flywheel motion sensors (for MANUAL SETUP mode), cyclestop limit switch, auxiliary stop, air pressure switch, motor control.

10). NEMA 12 QUICK-LATCH CONSOLE: 10" high x 12" wide x 4" deep.

11). 110/120 VAC CONTROL POWER INPUT.

12). PREWIRED MOTOR CONTROL PACKAGE available (with 220/440 V. step-down transformer).

13). The optional SYSTEM 1500 Air Null Pressure System can be used with a combined clutch/brake installation for easier slide adjustment in the Manual Setup Mode (helpful for larger size machines). Provides an easier and less expensive machine upgrade utilizing a combined clutch/brake.

14). PREWIRING OF COMPLETE SYSTEM at no extra charge (control console to motor starter box and feed input jacks to control console) when ordering the motor starter package with the system control.